Street Flyer
Heliman
Location: Las Vegas, NV, USA
| Well this could be 2 things. THe first one could be that your flight switch is not working correctly. The second thing could be that your MGP is screwed up.
First, go to the servo moniter screen. When your flight mode switch is all the way forward(normal mode) , the bar on the aux 2 channel should be all the way to the left or right depending on if your aux 2 is reversed.
Then, flip the flight mode switch to the center position. THe bar on the aux 2 should be in the center. Next, flip the switch all the way back(idle up 2). THe bar should be on the opposite side that you started with, when the swich was in normal mode.
If you transmitter isn't the problem, email or call BOB Li.
Here is a link to his contacts.
http://aerospire.com/aerospire.html |
