Magic Hook
Senior Heliman
Location: Naples, Florida USA
| I am building a 600e CF kit. My only heli building experience is a 450 & 500, no problems. This one has been a different story. I first ran into problems with a few metal upgrades. Metal blade grips have end play, Ail and Pit arms needed additional washer not to bind. Now with the servo instalation. Here is the issue. I have 9452 servos, I put the Align round horns on. With the spacers installed the servo is to far out linkage alignment like the plan shows even with balls reversed. I pulled the spacers, rubber gromet, mounted the servos back to back and they are solid. Alignment is close, but not right on for ail adn pit. Elevator, if I put the servo in from the inside, its close with balls reversed, but the ball link will rub. Outside like I think the plan shows, no alignemt. If you have any suggestions on what horns or how to install this nube would greatly appreciate the info. I have worked on this two days thinking the soultion would come to me. My mind is blank other than remove all the metal horns. Thanks, Rick
T 450 V2, T 500, T 600e |
