RunRyder - T-REX 600N Engine lost RPM for no reason

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 781 ONLINE 24 EVENTS SEARCH REGISTER START HERE

1 page

225 views

POST REPLY

Advantage Hobby	.	Revolution Models	.	CarbonXtreme
	.		.

Align T-REX 600N 700N > T-REX 600N Engine lost RPM for no reason

500extream
New Heliman
Location: canada

I have had 10 solid flight on my 600n and on my 11 flight as i was doing a flip and the engine/head speed droped a considerbaly is their a reason behind this??P.S i am not using any goveners

07-02-2008 07:59 AM

scottc
Key Veteran
Location: shakopee minnesota..USA

just the basic questions...
you were in idle up?
do you have mixing added in so when you do the flips and rolls the cyclics will add some throttle to the move..throttle to aileron/elevator.
engine tuned good?

Hey I didn't ask for this fetish.!!!But I'am sure paying for it....

07-02-2008 09:29 AM

jessegodsey
New Heliman
Location: Brighton, Michigan

Look to make sure none of the engine head screw came out

I have seen this when one or more screws on the top head cover of the engine has either come out or loose.

07-02-2008 01:01 PM

HeliSmith
Senior Heliman
Location: Canyon Country, CA

I overheated mine Sunday by thinking I was 1.5 turns out minus 1 click when I was 1 turn out minus 1 click. Got so hot the glow plug end desoldered and the wire dropped.

I started sputtering barely above an idle RPM then I hit hold. Motor is still fine for now knock on wood. Make sure you aren't getting too hot.

*** Team HeliHobby.com ***

07-02-2008 03:00 PM

HOMEPAGE

500extream
New Heliman
Location: canada

no my engine is not hot an i droped the engine to make sure every thing was tight.I havent tried it yet but i am thinking about puting a atg in their

07-02-2008 05:46 PM

Rymps
Senior Heliman
Location: Indianapolis and Windsor CO

Check the fuel filter. Did you use the stock Aling hose? Is it gummed up? I have seen a few like this. you will need to check the hose in the tank and see if it is gummed. if so that is you problem. pull the fuel filter apart and check the screen.

07-02-2008 06:09 PM

500extream
New Heliman
Location: canada

i am not using a filter but i am using the align fuel tubing

07-02-2008 06:20 PM

Rymps
Senior Heliman
Location: Indianapolis and Windsor CO

I would check the tubing. it is a POS. I would check the carb also. I would run a filter.

07-02-2008 06:57 PM

500extream
New Heliman
Location: canada

ya i changed it and put new stuff in ..ya i will put a filter in!!any other posibalitys

07-02-2008 08:10 PM

Rymps
Senior Heliman
Location: Indianapolis and Windsor CO

Chechk the inlet of the carb. for dirt.

Check the glo plug it might be worn out or on its way.