rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 654 ONLINE 42 EVENTS SEARCH REGISTER  START HERE
 
1 page207 viewsPOST REPLY
Model Rectifier Corp . RCHover . RC-Direct

.
.
e-Align T-REX 450-500-600 > T-REX 600 What mods needed to fit the neu 1912h 1y in the 600e
 
 
npsk8ter
Senior Heliman
Location: Joliet, Illinois USA

I know someone could post a link about what mods have to be done to fit this motor in. I had no clue it wasnt just a bolt in fit. Any links would be greatly appreciated!

Looks only go so far but mann it sure looked good when it crashed!!!!
07-01-2008 05:03 PM
 
 
Heli 770
Key Veteran
Location: Lemon Grove, Ca. USA.

I'm going to try and find for you.
07-01-2008 05:47 PM
 
 
npsk8ter
Senior Heliman
Location: Joliet, Illinois USA

thank you. everyones tellin me helifreak but u gotta b a member and thats LAME!

Looks only go so far but mann it sure looked good when it crashed!!!!
07-01-2008 07:06 PM
 
 
Heli 770
Key Veteran
Location: Lemon Grove, Ca. USA.

npsk8er
This is what I got, Enlarge motor mount bolt holes for 4mm. screws. Trim canopy to fit motor. No frame mods?
Hope this helps, Good Luck!
07-01-2008 08:12 PM
 
 
npsk8ter
Senior Heliman
Location: Joliet, Illinois USA

yes theres frame mods. the motor aint even close to fitting! Tried and no luck.

Looks only go so far but mann it sure looked good when it crashed!!!!
07-01-2008 08:26 PM
 
 
Heli 770
Key Veteran
Location: Lemon Grove, Ca. USA.

Try and PM, MrMel. I think he has done one?
07-01-2008 08:29 PM
 
 
centuryman
Veteran
Location: deerriver,mn usa

yes frame mods but no canopy mods. basicly have to cut out the frame on the sides , ans then it will fit easy, i've done both mine for 1910 and a scorpion ,no duribilty issues either and with that scorpion rated at 4200 watts con and runniong on 12s it the frame was going to crack it would have by now.
07-02-2008 04:31 AM
 
 
c54funSenior Heliman - Location: Central Iowa -
Here is a picture of the cut frame with the 1910. Very simple.



4 out of 3 people have problems with fraction's.
07-02-2008 10:10 PM
 
 
Heli 770
Key Veteran
Location: Lemon Grove, Ca. USA.

c54fun
Dose the 600e have different frames? The one I was looking at the motor was mounted on top.
07-02-2008 10:33 PM
 
 
c54fun
Senior Heliman
Location: Central Iowa

Not sure about the top mount frames. I have seen some people here use this type of frame. Dont have much info on it though. Someone will chime in.

4 out of 3 people have problems with fraction's.
07-02-2008 10:53 PM
 
 
Ben-T-Spindle
Elite Veteran
Location: Central Illinois

Quote 

Dose the 600e have different frames? The one I was looking at the motor was mounted on top.

Stock frames have the motor mounted on the bottom and it’s very easy to install a Neu Motors 1900 series motor. Just trim the frame below the motor mount and you have it.

The stock frame is excellent and there is no real need to install a frame of a different design.





... BTS
07-02-2008 11:21 PM
 
 
centuryman
Veteran
Location: deerriver,mn usa

I can see 2 benifits to the top mounted motor frames.

1 higher center of gravity for faster roll and flip speed's.

2. pinion can be closer to the bearing of the motor therefore easier on motor bearings.

but unless i break my frames i don't see enough of an advantage to spend the 130.00 plus to do it.my 600e already rotate fast enough and the only motor with bearing issues is the stk one witch is brand new in it's box still.
07-03-2008 04:12 AM
 
 
1 page207 viewsPOST REPLY
MaxAmps.com . HeliDirect . PowerHelis

.
.
e-Align T-REX 450-500-600 > T-REX 600 What mods needed to fit the neu 1912h 1y in the 600e
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Friday, September 5 - 2:59 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie