hawkeye4077
Senior Heliman
Location: Planet earth
| Thanks for all your help,
I wanted to ask about the tail servo setup, it’s a S9253 I know it’s a weak (I think 2Kg/cm 0.8deg/sec) servo for a 90 size machine and the arm is set on 14mm, now can I move the arm to say 18~20mm? I’m using CSM720 gyro. and getting kicks on throttle.
i'm using futaba 9Zwc2, i just wana make sure i understand the gyro menu, in my case it's hh under 50% and normal over 50%.
now if i go in the hh mode to 10% that means i'm increasing the gain?
and going to 70% on normal is also increasing the gain?
Gerard D. |
