RunRyder - FASST heli installs

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 798 ONLINE 24 EVENTS SEARCH REGISTER START HERE

1 page

1812 views

POST REPLY

Thunder Power RC	.	Mikado Modellhubschrauber	.	GrandRC
	.		.

Radio - Futaba FASST > FASST heli installs

rightflyer
Heliman
Location: Columbus OH

I just got my 10C and considering installing FASST receiver into my EVo 50 and Beam. Anyone have any experience in FASST installs in maintaining 90 degree antenna separation

rightflyer

06-24-2008 12:33 AM

montarok
Key Veteran
Location: Brooklyn, NY

There are some pics i the manual. Its pretty much plug-and-play.

------------------------------------
www.carifuna.com

06-24-2008 01:55 AM

HOMEPAGE

rightflyer
Heliman
Location: Columbus OH

Fasst

Thanks, I'll take another look. The one I saw used some plexiglass to antenna mounting.

rightflyer

06-24-2008 02:06 AM

steffgiguere
Key Veteran
Location: St-Eustache, Quebec, Canada

I have done the following: tied the antennas to the boom brace. Slip the antennas into a piece of fuel tubing and tie on the boom brace with tie wraps (not too tight). How you can see it well in the picture.

I wish I could fly 24/7

06-24-2008 02:06 AM

HOMEPAGE

FlyingDutchman2
Heliman
Location: Bjoneroa, Oppland, Norway

Hi. This is how I did it, works great and never had an issue

After the pic was taken I put some fueltubing around the antennas where the rubber band is holding it down

It ain't over 'till the chopper lies belly up, on the ground!

06-24-2008 05:45 PM

rightflyer
Heliman
Location: Columbus OH

FASST

Thanks. Pretty simple . Thanks for the help.

rightflyer

06-24-2008 11:57 PM

lrogers
Key Veteran
Location: Mobile, Al

When I installed the FASST receiver in my Evo 50/H500, I placed it in a "strong-box" and just drilled holes on either side for the antennas to exit. Quick, easy and neat installation.

I just installed a FASST receiver in my Vigor (all are now usung FASST) the other night and used the little plastic case the receiver came in, some foam, a couple of grommets and a piece of fuel tubing and made my own "strong-box". Again, I drilled holes on either side for the antenna wires.

Larry Rogers - R/C Helicopter Pilot

06-25-2008 02:20 AM

HOMEPAGE

haggy38
Senior Heliman
Location: Bogotá - Colombia

Hope this help.

Regards,
Gustavo

06-25-2008 03:29 AM

lrogers
Key Veteran
Location: Mobile, Al

Very nice tutorial Gustavo.

Larry Rogers - R/C Helicopter Pilot

06-26-2008 01:26 AM

HOMEPAGE

ripmax
Heliman
Location: Indiana

great video. thanks for that!

06-26-2008 02:35 PM

Bad Karma
Veteran
Location: UK

I separated them vertically by 90, one pointing down under the receiver tray at 45 degrees down, and the other against the canopy screen, approximately 45 degrees up.

I'm not sticking them to anything though.

06-30-2008 01:19 PM

K-ROK
Heliman
Location: REDBANK NJ USA

Hey Haggy great video and great backround music.

06-30-2008 02:32 PM

hookmaker
Heliman
Location: Copenhagen, Denmark

Any pics on FASST antenna wiring on 50/90 size helis?

/Henrik

07-23-2008 11:18 AM

DougV
Heliman
Location: Miramar, Florida - USA

Here is mine, Rappy 50 Titan.