rc2000
Heliman
Location: fayetteville, nc. USA
| Well, 2 problems. First, the cyclic control is super unresponsive. The heli is almost uncontrolable due to the slowness of the input response of the cyclic. I check responsiveness of the servos without the blades turning and response is fast and accurate. I checked for overtightening of the rotor head or servo binding and all is as it should be. I did notice that the flybar seems stiff when I teeter totter it but could not find the source of the tightness. I have JR DS285 dijital servos on the swash.
Second problem is when I increase power, the tail will spin. The faster I increase power the faster the tail will spin. I have a GY401 and a DS3400 servo on the tail. This will happen in heading hold mode and normal mode. I checked for full range and responsiveness of the servo and it is good. Tail is rock solid in a hover. Thanks for any help anyone can give.
-Rob
Mars 480, Beam E4 |
