rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 554 ONLINE 45 EVENTS SEARCH REGISTER  START HERE
 
2 pages [ <<    <     1     ( 2 )    >    >> ]669 viewsPOST REPLY
Esprit Model . Thunder Power RC . Real Raptors

.
.
e-Mikado Logo 400 500 600 > Tail belt static use Tri Flow on it
 
 
HeliCSR
Heliman
Location: Hesperia, Ca, US

Lube Belt

Just lube your belt and fly. A lubed belt will last much longer anyway.

Lube them gears, I see all these super white gears...Yeah I use to use no lube.

Put some lube on and see how quite you heli becomes my motor sounds like a turbine now.
06-27-2008 10:58 PM
 
 
T-rexn8
Senior Heliman
Location: COLORADO

Well I bit the bullet and purchased the Graphite 33. It was very easy to apply, I basically just painted it on with a q-tip after spraying a small amount in a dish. I also added 4 3x8 bearings to the idler pulley and installed the so-called anti-static rear tail gear. I hope that will be enough to keep the belt on and static free at all times. Maybe some 3x4 would be better?

Anyways I hope this works because I didnt ground anything and I only applied to the outside of the belt.

By the way My CC HV 85 ended up being completely out of commission. It would not connect to the Castle Link or arm in any way.

Flightpower Batteries
07-15-2008 10:14 PM
 
 
2 pages [ <<    <     1     ( 2 )    >    >> ]669 viewsPOST REPLY
Mikado Modellhubschrauber . GrandRC . CanoMod

.
.
e-Mikado Logo 400 500 600 > Tail belt static use Tri Flow on it
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, August 30 - 4:16 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie