RunRyder - Vigor Bearing Help

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 414 ONLINE 42 EVENTS SEARCH REGISTER START HERE

1 page

93 views

POST REPLY

CanoMod	.	Futaba-RC	.	A Main Hobbies
	.		.

JR Heli Vibe - Airskipper - Sylphide - Venture > Vigor Bearing Help

cjjacquez
Heliman
Location: Chihuahua Mexico

Guys I have an old JR Vigor std but I just can not find the part number for the small little bearing that goes under the clutch bell

Any ideas? or dimensions?

Thanks

06-18-2008 03:32 PM

HOMEPAGE

lrogers
Key Veteran
Location: Mobile, Al

I looked in my CS manual and it looks like you have to buy the entire clutch bell to get that bearing. Part #996017 is listed as clutch bell assemebly complete with bearing and lining.

Larry Rogers - R/C Helicopter Pilot

06-18-2008 07:53 PM

HOMEPAGE

RappyTappy
Elite Veteran
Location: Las Vegas, NV

Holy crud, a clutch bell is $50....for a bearing?

All you need are the dimensions and you should be able to get them from your clutch bell that you have. Just need the outer diamter and height(can measure the depth in the clutch bell) and the inner diamter(size of the start shaft). Then go here: http://www.bocabearings.com/

Chris
Rex 500 A123 Power

Forever Brothers
Mickey Tylo

06-18-2008 08:30 PM

HOMEPAGE

cjjacquez
Heliman
Location: Chihuahua Mexico

Thanks for your inputs I had to dissasembly the clutchbell and the dims are:
outer diam = 11 mm ;
inner diam = 5 mm ;
height = 5 mm

Regards

06-19-2008 10:49 PM

HOMEPAGE

atvracer
Senior Heliman
Location: Transplanted to Oklahoma

http://www.helidirect.com/product_i...roducts_id=1489