RunRyder - Push-Pull servo Wheel size for Vibe 50?

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 334 ONLINE 25 EVENTS SEARCH REGISTER START HERE

1 page

173 views

POST REPLY

HeliHobby	.	Ron’s HeliProz South	.	Century Helicopter
	.		.

JR Heli Vibe - Airskipper - Sylphide - Venture > Push-Pull servo Wheel size for Vibe 50?

Carbon Copter
Senior Heliman
Location: USA

I guess I could check my manual as it may be in there, but at the moment, I am closer to the computer : ) --I was thinking of ordering some Quick UK ones, but the come in 28mm and 35mm. Anyone know which ones would be appropriate for the Vibe 50?

06-18-2008 04:35 AM

K-ROK
Heliman
Location: REDBANK NJ USA

I believe the right distance is 27mm. So I guess the 28 would be the best choice.

06-18-2008 04:38 AM

Carbon Copter
Senior Heliman
Location: USA

Good guess, but I just found some details and it seems the 28 does not have the holes in the right spot for the 27mm requirement. Thanks for the help. I figure at 14mm from each side should be close enough to 27mm (28mm)

35mm : A total of 24 holes at 11, 12.5, 14 & 15.5mm from centre allowing various offsets and spacings.

28mm: A total of 24 holes at 7.5, 9, 10.5 & 12mm from centre allowing various offsets and spacings.

06-18-2008 06:59 AM

tchavei
rrProfessor
Location: Portugal

27mm

If you happen to use futaba servos, the 6 point servo arm has the outer holes precisely at 27mm. On the 4 point start horn, its the second hole counting from outwards. I also have futaba drill gauges that have a 13.5mm setting (x2 = 27mm)

I would rather keep geometry right than bling metal horns

Tony

--------------------
"Perfection and patience usually walk side by side..."

06-18-2008 11:15 AM

HOMEPAGE

DS 8717
rrProfessor
Location: Here wishing i was somewhere else

I used the align servo wheels on mine,they are 14.5 from the center i believe.

06-18-2008 11:18 AM

BlueGarry1
Veteran
Location: Romford, Essex, UK

I use the 35mm Quick UK push/pull wheels on both of my Vibe 50's and they work just fine. All the ball link holes are threaded so you don't have to use small nuts on the back.

Look at the photos of my Vibe 50 in my gallery

Bluegarry1

JR Vibe 50 Just love it !!

06-18-2008 12:04 PM

Carbon Copter
Senior Heliman
Location: USA

Thanks Everyone. Damm Gary that Air Skipper 90 is Beautiful!! --Awesome.

Sounds like I would be fine at 28mm. Although I am one to believe in not changing spec too much as mention, but I think the difference is not mission critical.

06-19-2008 12:04 AM

1 page

173 views

POST REPLY

MTA Hobbies	.	Model Rectifier Corp	.	3D Heli Depot
	.		.

JR Heli Vibe - Airskipper - Sylphide - Venture > Push-Pull servo Wheel size for Vibe 50?

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic