rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 339 ONLINE 21 EVENTS SEARCH REGISTER  START HERE
 
1 page506 viewsPOST REPLY
Advantage Hobby . Revolution Models . CarbonXtreme

.
.
Synergy R/C Synergy N9 > What size blades are you using?
 
 
Dakine
Elite Veteran
Location: OC, Commifornia

What size blades (mains and tail) are you using on your Synergy?

Thank you
06-17-2008 04:10 PM
 
 
Rymps
Veteran
Location: Indianapolis and Windsor CO

I am using Radix 710s and Vblades 105s on the tail
06-17-2008 04:23 PM
 
 
Marshall Burrou
Senior Heliman
Location: Maumelle, Arkansas

Radix 710 SB's and 105 Radix tails with Super Stubz!


CurtisYoungblood.com
06-17-2008 04:26 PM
 
 
wings19
Veteran
Location: Traverse City, MI

Radix 710SB, Radix 105 tails, Super Stubz...

Nick
If the wings are travelling faster than the fuselage, it's probably a helicopter
06-17-2008 04:54 PM
HOMEPAGE  
 
 
dsmit258
Senior Heliman
Location: Knoxville, TN

All you guys with the Radix 710SB's - what is your roll rate like? Looks like most of you are using Super Stubz too, are these 5mm or 4 mm conversions? I am also using the Radix 710SB with stock 5mm flybar and SAB paddles. The roll rate is a little on the slow side for my tastes....

David E. Smith
President, ETMHS
AMA 579111
IRCHA 2336
06-17-2008 05:57 PM
HOMEPAGE  
 
 
wings19
Veteran
Location: Traverse City, MI

I am using the 5mm flybar with mine. Roll rate is very fast. I am not using full cyclic throw either. I don't have a gauge to measure the cyclic throw but if I used full cyclic throw it would have an extremely fast roll rate. The Synergy roll rate off the bat was slower than my 600N, I noticed that I had to use more throw in the Synergy to get the same performance but it is there with the Stubz and a little more throw. I like flying hard 3D and I am more than happy with the handling of my N9 with this setup. The nice thing about it is that it doesn't tend to be pitchy in FFF.

Nick
If the wings are travelling faster than the fuselage, it's probably a helicopter
06-17-2008 06:38 PM
HOMEPAGE  
 
 
Marshall Burrou
Senior Heliman
Location: Maumelle, Arkansas

The roll rate does improve with the Super Stubz. It also still tracks really well. I'm at about 13 degrees of pitch on the mains. I usually run the cyclic rate up to where I like the roll rate and back it down a tad if heavy collective tends to bog at any given area. The SB's also auto very good on this particular heli as well.


CurtisYoungblood.com
06-17-2008 07:32 PM
 
 
Dakine
Elite Veteran
Location: OC, Commifornia

Thank you for the info!!
06-17-2008 09:58 PM
 
 
Saleh
Veteran
Location: Kuwait

both of them has radix 710 the one with stock paddles has the SB flys great

If you aint crashing you aint flyin
06-17-2008 10:30 PM
HOMEPAGE  
 
 
sotos3D
New Heliman
Location: Greece

radix 690,super stubz paddles 5mm,cy 105 tail..

RC helis are not toys...
06-18-2008 03:31 PM
HOMEPAGE  
 
 
airboss
Elite Veteran
Location: OC ,california

Radix 710s and 105.

OCRM....flyBlackstarr.org.
06-25-2008 12:51 AM
 
 
riguardino
New Heliman
Location: Italy

SAB 710 3D / MAH 710, SAB pad, SAB 105 tail
06-26-2008 06:52 PM
 
 
Himhoe
Heliman
Location: Denver, CO

Radix 710 and 105 Radix tails with Super Stubz. I am also running the 4mm flybar and no flybar weights. It rolls and flips a bit faster than the stock setup with the SAB paddles.

Josh M.
Synergy Helicopters
YS Engines
Tammies Hobbies
Magnum Fuels
07-08-2008 02:50 AM
HOMEPAGE  
 
 
1 page506 viewsPOST REPLY
Midland Helicopters . HeliProz . ZoomsHobbies

.
.
Synergy R/C Synergy N9 > What size blades are you using?
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Friday, December 5 - 11:43 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie