Futura SE
Veteran
Location: Fayetteville, Arkansas
| The Synergy has a fuel churning issue. I have the big SE engine mount that Synergy swears gets rid of it and it doesn't, but it does greatly minimize it. With an OS egnine that is.
Here is the good news. It has zero effect on the machine and how the engine runs. Actually with a YS and SE engine clock it will go away. The OS is not as smooth. I run the OS SZ Pumped Hyper.
The rest of my machine is silky smooth and always has been. I have the HyperDrive tail as the stock part is a piece of garbage design wise.
The heli will shake if you have the dampening too hard and/or the head RPM is too low. What is your headspeed???? And what dampners/shims are in the head??? OEM, Hyperformance, Infinnovation, etc??? How many and what thickness shims are in the head??? LOTS of things could do what you describe.
By the way from the pic it looks like there is about 18 layers of tape under the gyro sensor. Try some new tape and only put one layer under the metal plate the 611 comes with and one above it. You want it isolated from vibes yes, but not bobbing around like a cork in the water either. Can't hurt.
Give us some more info. I bet we can help.
Norman Ross Jr. |
