rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 330 ONLINE 21 EVENTS SEARCH REGISTER  START HERE
 
1 page238 viewsPOST REPLY
Midland Helicopters . HeliProz . ZoomsHobbies

.
.
Miniature Aircraft Nitro/Gas Helicopters > help me find 90 motor mount for 60 xcell SE or pro there the same X cell said...
 
 
army67romeo
Heliman
Location: phx USA

help me find 90 motor mount for 60 xcell SE or pro there the same X cell said...

The mount has a Circle cut on the count i think on the motor rail side


All so looking for 31.1/2 booms and looking for the 4 stroke cluch stuff think i have to run a 90 main gear and 11 theeth pinon

111-16 parts
111-9

I have am puting back together 3 xcell i have

98 SE Pro is a 60 but what to make a 90 ..with 33in boom
Pro 1 60

and a stock bent frame 60

Need booms and drives right now bad
06-13-2008 11:31 PM
 
 
junkpilot
Senior Heliman
Location: Alamogordo N.M.

90 motor mount

The 90 mount is available at Zooms Hobbies in Chatsworth Ca. They advertise on RR. You will also need 2 shims per side between engine and mount to space the engine properly. Zooms also has any and all the tailboom parts you may need. You did not say what type of T/R drive you are using. If it's in your budget use torque tubes on all of them but the 90s for sure.
Why do you need a four stroke clutch? Are you running a fourstroke?
If you are converting to fourstroke you can buy a kit.
Regarding bent frame 60, Do not put a bigger engine in it, It can't handle the power.
If you have questions PM me.
Junkpilot

When you fly JUNK it's hard to tell when you've crashed!
07-01-2008 02:03 AM
 
 
Bdmcobra
Senior Heliman
Location: Manassas, Virginia

I have a lot of the parts you need. Pm me with a list
I have converted mine to a 90 os and it flys really great.
This is what I have learned:
The first thing is that the 4 stroke clutch is a 10 tooth only. The main gear is a 95 tooth for 7.92 ratio, close enough for me. ( the ys 90 uses a different ratio)
I know that my #1004 se pro had a 60 ys in it and I used the same motor mount for the os sz90. You have to notch the frame ever so slightly so that you cannot tell once bolted up.
Beware of the tail blowing off. I was convinced by quite a few different people that the 90 needs the Stratus tail for example.
Honestly an easy conversion and Oh my is the 60 se pro an easy heli to work on!

fly once a day to keep the insanity away
07-02-2008 05:50 AM
 
 
1 page238 viewsPOST REPLY
HeliHobby . Ron’s HeliProz South . Century Helicopter

.
.
Miniature Aircraft Nitro/Gas Helicopters > help me find 90 motor mount for 60 xcell SE or pro there the same X cell said...
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Friday, December 5 - 11:41 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie