rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 273 ONLINE 38 EVENTS SEARCH REGISTER  START HERE
 
1 page125 viewsTOPIC CLOSED
Futaba-RC . A Main Hobbies . Boca Bearings

.
.
Beginners Corner > evo 50 pitch setup
 
 
birdsofpray
Heliman
Location: lake villa il lake

Hello I have an evo 50 sceadu and just finished the build and atempting to set up the pitch adjustments for the first time. I have all my control arms parrell and looking level also I have the 3mm gap that is required at the top just bellow the main hub. I beleve everything is built and set correctly but im confused on what steps are required to adjust final pitch setup. I am able to get 0 pitch at mid stick but when I try to get 9 deg. at high stick I get 6 max and 6 max for low stick also. I adjusted my two little pitch linkige thinking that may be it but when I adjusted that off 0 degree at mid stick I was able to get 9 deg. at high stick but only 2.5 deg. at low stick, so I just put those back the way they was 0 deg at mid stick. So is there another linkage I need to adjust to get more distance? I also tryed adjusting the travel adjust and was able to acheve what I needed but seemed wrong to do that and I dont beleve it will work for my other idle up switch modes by doing that. Any and all help is appricated on this matter and I did try serching for the awnser before posting this but I had no luck maybe I was serching the wrong sections or something.
06-08-2008 07:35 PM
 
 
flag8r77
Senior Heliman
Location: Jacksonville Florida

Are the curves in your radio all set to normal 0-100 linear curves with no end point adjustment( everything at 100%), no subtrims? Also make sure in the swash menu, the pitch setting is set to either 50% or 60%, whatever your radio was set to out of the box. Also, double check the measurement of all linkages.

Life is tough, it's tougher if you're stupid
06-08-2008 09:01 PM
 
 
Markerbeacon
Veteran
Location: Charles City, Iowa

What radio? What servos? Do you have the required distances from center of servo to attached links?

-Mark

Charles City, Iowa? Wear the fox hat!
06-08-2008 11:16 PM
 
 
alf1096
Senior Heliman
Location: TX

If it is ccpm you my need to incresed the mixing percentages to get bigger throws.
06-09-2008 02:21 PM
 
 
rudyy
Veteran
Location: E. Amherst, NY, USA

You only get 12 degrees maximum which apparently something is not right. You should get a minimum of 20 degrees i.e. -10 to +10.

1) Like others said, are your servos ATV at 100% and no subtrim?
2) Are you sure all your rods' length are correct?
3) Are you using the bottom hole in your main mast?

Rudy
06-09-2008 04:25 PM
 
 
1 page125 viewsTOPIC CLOSED
Modefo's RC Helicopters . XHELI.COM . Autography FlightPower

.
.
Beginners Corner > evo 50 pitch setup
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Monday, September 8 - 8:36 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie