RunRyder - Control rod in the manual

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 723 ONLINE 24 EVENTS SEARCH REGISTER START HERE

1 page

171 views

POST REPLY

MTA Hobbies	.	Model Rectifier Corp	.	3D Heli Depot
	.		.

Synergy R/C Synergy N9 > Control rod in the manual

beginner
Heliman
Location: LA, CA

Are the lenght of control rods for Rotor Head in the manual is correct? Seem like the washout link shown 7.5mm but I have seen some where that it should be 5.5mm. Any other control rod should be different from the manual.

Thanks,

05-30-2008 12:15 AM

HiroboFreak
Senior Heliman
Location: Central Coast, NSW, Australia

Yes according to the latest Engineering changes, they have changed the linkage lengths to 5.5mm along with adding longer balls & different spacers to the see-saw & bell mixers on the blade grips.

Do you have a recent kit?
It should have included the addendums to manual pages A18 & A19.

Here are the .PDF files for the engineering changes.

http://www.synergyrc.com/en/images/...s/a18_rev_1.pdf

http://www.synergyrc.com/en/images/...s/a19_rev_1.pdf

Cheers.

Synergy N9 | T600n Pro

05-30-2008 12:38 AM

HOMEPAGE

beginner
Heliman
Location: LA, CA

Thank you HiroboFreak. Mine is not recent kit. Any other rod from swashplate to the head are not the same lenght as the manual.

Thank you.

05-30-2008 01:01 AM

HiroboFreak
Senior Heliman
Location: Central Coast, NSW, Australia

The short links from the bell mixers on the blade grips are to be 39mm overall.

Other than that, all linkage lengths are as per the manual.
Keep in mind that the lengths are just a guide.

You will still need to check your geometry & setup.

Synergy N9 | T600n Pro

05-30-2008 01:23 AM

HOMEPAGE

beginner
Heliman
Location: LA, CA

Thank you very much for your help.

05-30-2008 01:42 AM

1 page

171 views

POST REPLY

JR-Spektrum	.	Gyro Hobbies	.	E-flite
	.		.

Synergy R/C Synergy N9 > Control rod in the manual

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic