Jason Bell
Elite Veteran
Location: San Diego, Ca
| I am using a 20mm distance, running a 8900G tail servo with the old discontinued Airtronics HD wheels. I am seeing a gain of 30% with my spartan gyro. Danny/Markus however, use the heavy duty double sided arm(which is shorter than my Airtronics wheel) that comes with the 8900G/8717s,with the ball on the outer most hole and I believe are using a resultant gain of 35% on the spartan. I set my limits to where the tail servo is not buzzing when at either end of the pitch range on the tail shaft.
With the bell crank, it is set up much like the align helis, where the L pitch slider is perpendicular to the tail shaft, and the tail blades will have a slight amount of pitch in them. (This is in normal mode on the gyro as well).
Team Avant
Team ElyQ
Flight Power USA
Aerospire
Vblades
|
