RunRyder - Hurricane 200 gyro placement

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 627 ONLINE 42 EVENTS SEARCH REGISTER START HERE

1 page

365 views

POST REPLY

MTA Hobbies	.	Model Rectifier Corp	.	RCHover
	.		.

e-Gaui Hurricane 200 & 550 - EP100 > Hurricane 200 gyro placement

slvrado02
Heliman
Location: Denton, TX

i am trying to help my brother out with the set up of his 200. i have seen that almost everyone has been mounting the gyro behind the battery, receiver in the front of the frame (above the batt) and the esc on the side...

what i was wondering, is anyone having problems with the gyro being that close to the main shaft. i was under the impression for some reason that it needed to be mounted as far out for sensitivity. is this wrong?

his set up is going to be: ar6000 rx, stock motor, stock esc, batts that came with it, and a gy401.

if anyone has a better way of placing everything, could you please post some photos?

much appreciated

05-28-2008 05:20 PM

Eagle2bravo
Senior Heliman
Location: scuba diving for helis

There are some great pics right in this section. Behind the batt,under the shaft works AOK for me.

Evo 50, Trex 450 se, Gaui 200, Trex 500, Blade cx, . "If ya plant corn, ya get corn."

05-29-2008 03:14 AM

slvrado02
Heliman
Location: Denton, TX

cool, thank you!

05-29-2008 05:08 AM

realwiz
Senior Heliman
Location: Medina, Ohio, USA

Not sure if the 401 has this limitation, but the HS5000 gyro instructions state that it has to be 10cm away from the motor to prevent glitching. So under the mainshaft isn't far enough away. I'm going to try and make a platform near the rear of the frame.

Any body know where I can get more of that gyro foam tape?

05-29-2008 06:05 AM

HOMEPAGE

1 page

365 views

POST REPLY

RC-Direct	.	MaxAmps.com	.	HeliDirect
	.		.

e-Gaui Hurricane 200 & 550 - EP100 > Hurricane 200 gyro placement

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic