TomC
Veteran
Location: Gold Coast, Queensland, Australia
| Lou,
I use the helicommand rigid, not the V-bar, but I think that there are a couple of things that might help regarding the slight bounce-back.
First, go to the tail gyro settings and see if you can increase the delay a bit (~10% less hard stop in my case). This fixed my problem.
Secondly, you might want to try smaller tail blades (95mm instead of 105mm). Since you are not fighting as much tail torque without a flybar, you should be able to get away with smaller tail blades. The torque compensation (like revo-mix, but done within the HC and V-bar systems) helps a bit as well.
Good luck sorting this out Mate.
Cheers,
TomC
CX2 2s
Logo10- 3D 5s
Trex600 10s
2x Ion-x, 1x15s DS, 1x15s SS |
