rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 301 ONLINE 45 EVENTS SEARCH REGISTER  START HERE
 
1 page196 viewsPOST REPLY
Thunder Power RC . Real Raptors . Mikado Modellhubschrauber

.
.
HIROBO Freya - Sceadu - Shuttle > Measurements of Freya Radius Block
 
 
marked23
Veteran
Location: Lynnwood, WA

Does somebody have a 404730 radius block they can measure for me?

Are the pins 2mm x 20mm?
Is the space between the pins 18mm?

I'm hoping that this part would be a suitable substitute for the same thing on another heli I have. If the measurement is on target, I'll buy one and try it.

Thank you,

-Mark
05-23-2008 06:27 AM
 
 
contact303
Veteran
Location: Netherlands

EX radius block

will measure when i get home ...still at work so a few hours i will get u an answer
05-23-2008 11:02 AM
 
 
contact303
Veteran
Location: Netherlands

Right I have the EX radius block on my evo 50 measured
lenght of the pins : ~ 19/20mm
Distance between : 20mm
and the pins are indeed 2 mm

Well thats it hope i got this all right ...
05-23-2008 03:49 PM
 
 
helicopterMark
Veteran
Location: Rumson, NJ

hello mark, I'm not sure the part number but I have the metal EX radius block on my Freya 90, I would immagine them to be the same size since they are direct substitutes/upgrages. I do not have the manual to reference the part number handy. I do not think I can accurately measure it without removing it so I'd like to make sure it's the right one before I pull it for you, best of luck with your project.

M3

Mark Schneider
Team MRC/Hirobo
Turbulence D3, Evo 90, EVO 50 EX
05-23-2008 04:48 PM
HOMEPAGE  
 
 
marked23
Veteran
Location: Lynnwood, WA

everybody,
Thanks for the comments.

contact303,
When you say "distance between" do you mean "on center"?

If I measure what I have from the center of one pin to the center of the other, I get 20mm. Which means that the space between is 18mm. Is that the same as what you measured?

-Mark
05-23-2008 06:17 PM
 
 
contact303
Veteran
Location: Netherlands

No i meassured the distance between the pins so not to mid pin
and this was 20
Meassuring the outside so from outside pin to other side outside pin gives me 24 mm..
this would be right because the pins are 2 mm so 20 +2 +2 = 24MM
inside 20 outside 24mm
Hope it helps
and I hope the EX radius is rthe same you are refering to ..
GOOD luck
05-24-2008 09:44 AM
 
 
1 page196 viewsPOST REPLY
GrandRC . CanoMod . Futaba-RC

.
.
HIROBO Freya - Sceadu - Shuttle > Measurements of Freya Radius Block
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, August 30 - 9:06 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie