mi25
Heliman
Location: Taiwan
| reinstall following driver,
TP1010C USB Programmer Driver
Download this first to install your USB
Programmer.
and install following firmware again
TP1010C V2.3A Upgrade for PGM-01
Update list:
1. Added NiCd/NiMh/PB(SLA)/A123 battery charge/discharge/Cycler
2. Memory slots(10memory) are independently assigned to the each battery type.
3. A123 top off voltage is adjusted to 3.65V/cell
4. Added System timeout(it can be selectable to 2-10Hour)
5. The last cycle data of charge and discharge before an error interruption occurs which can be readable by a
press[Sel] button.
6. Discharge power factor added
7. Added 1's decimal digit to the volatge display.
DONT USE THE PGM-V2 DRIVER |
-.jpg)
