Jaydee
Heliman
Location: Nottingham - England
| sorry for the delay I have been down south at the Charmouth fly in for a long week end ,also it takes time to get these photos on the system.
I am loading a copy of the motor plate it fit the existing side frame holes, then slides back and forth for motor adjustment. the cush drive is from RS components and uses a spider to correct for mis alignments and runs vibration free, it is available pre drilled in metric & imperial so Astro motors could be used, I used a Ultra 1600-8H ex Vairio silence I got from a swop meet, its a bit too hot for me & in fact they are using a 1300-8H now for more duration.
Regards
Jaydee
 |
