gorn
Elite Veteran
Location: Western Australia
| Had a few test flights in the backyard with my EX.
She's a lively sucker 
Im not sure how much of that was because the previous owner had used the rubber mounting grommets on the cyclic servo's.
Always a bad thing to do on small servo's on an electric.
They rock and roll with every input.
My Turnigy ESC works very well........except soft start engagement point is a bit abrupt.
Going to start the big pitch mod, and get better washput to flybar link geometry for more cyclic.
Still am not wanting to slot the head to stop it rocking on the main shaft. Will try anything b4 I start cutting.
Im also pretty certain that I will order the adjustable phasing head block as soon as funds allow.
Have been re-reading some old posts about having to use a bit of mixing to counter cyclic interaction.
Anyway, we'll see. Im just happy that Ive had a few test hovers with it.
Still amazes me that people build all metal heli's, but use not 1 drop of locktight 
Had to go over the whole heli.
Anyhoo, thats my little nothing update for now lol
If you bling it, they will come :D |
