TomC
Veteran
Location: Gold Coast, Queensland, Australia
| BrainDrain,
Like you, I had a little blade flutter with my 10s Trex600 flybarless early on (with Radix blades or Align blades, made no difference). I'm using the hard align 90 dampeners w/sleeve.
I did the following 3 things that completely got rid of this;
- adjusted the swashdriver (using mikado one) so it was dead square.
- replaced a couple of links that had a tiny bit of slop in them.
- tightened up the main blade bolts a bit (fairly firmly).
Once I did all this and re-tracked the blades, it's been perfect!
Good luck sorting this out.
Cheers,
TomC
CX2 2s
Logo10- 3D 5s
Trex600 10s
2x Ion-x, 1x15s DS, 1x15s SS |
