Eleven_Bravo
Senior Heliman
Location: Modesto,CA
| I have used a heat gun on a badly damaged R50 canopy you cannot tell it was ever crashed unless I show you.
Keep the heat gun moving or you will burn the canopy it happens quickly.
I also have used it to remove engine bearings and to tighten the shrink wrap on wood blades. If you keep it tight it will not tear and fly off the blade as quick. They last alot longer if you keep the nitro off the wood. I would not use it again on the engine bearing though the oven woks tons better.
Its not a maneuver until your looking down on it. ~Jason Krause~ Phoenix FF 08 |
