Intruder
Senior Heliman
Location: Algonquin, Illinois
| shaft collar
http://www.rcgroups.com/forums/show...threadid=108099
I am making perfect fit 3mm main shaft collars for hummingbirds and picolos, hornets etc.. Single set screw, much smaller than the 1/8 inch shaft collar people are recommending and certainly a much better fit. They work very well for me. I make them on my lathe.
It has a 3mm bore not 1/8"
It is made of 6061 -T6 aluminum, with a center bore of 3mm
I use a high quality hollow cup point set screw. Very light weight.
1/8 inch was too sloppy for me, so I decided I could do better.
I figured I'd bang out a bunch of em and see if anyone is interested. Believe me I don't make any money on em. But it is good practice on my lathe and I've got plenty of material around the shop.
If anyone is interested kdill@camera-shack.com or PM me
UP = Away From The Center Of The Earth |
