rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 677 ONLINE 46 EVENTS SEARCH REGISTER  START HERE
 
1 page374 viewsPOST REPLY
Next D . Fast Lad Performance . Ace Hobby

.
.
e-BEAM Beam E4 > Main Blade Holder
 
 
bk3
New Heliman
Location: Austin IN USA

Hello I was just woundering if anyone els has slop on the main blade holder to feathering shaft? It is a new Heli just put together. can move blade holder back and forth and up and down on feathering shaft I dont like that slop. Is it ok?

05-15-2008 06:54 AM
 
 
Vinljp
Heliman
Location: Singapore

The slop arises because you have not tighten the 2 nuts on your feathering shaft completely.

You have to tighten the 2 nuts till there is no lateral movement on the blade grip.
05-15-2008 07:30 AM
 
 
bk3
New Heliman
Location: Austin IN USA

Main Blade Holder

I have the 2 nuts as tight as it will go it feels like the slop is in the bearings in the main blade holder on the feathering shaft.
And I can not move the blade holders in or out.
05-15-2008 08:04 AM
 
 
StrangeRanger
Veteran
Location: VT

Stoopid question but you're sure you have both sets of o-rings and the metal spacer in there?
j
05-15-2008 06:48 PM
 
 
Jetleaf
Heliman
Location: Concord, N.C. - U.S.A.

And the thrust bearing installed correctly??
05-16-2008 12:25 AM
 
 
1 page374 viewsPOST REPLY
Esprit Model . Thunder Power RC . Real Raptors

.
.
e-BEAM Beam E4 > Main Blade Holder
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Friday, August 29 - 12:05 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie