joes66GT Heliman Location: Oconomowoc,WI
| I have a Trex 500 that has been great. All of a sudden in the last few time out they in forward flight the tail will start to oscillate up and down. If you do a straight climb out it won’t do it. I'm running 2 TP 2200 3S1P packs 12 tooth pinions last checked about 2600 head speed CF blades head and tail. If you change to normal mode after flying or lower head speed it gets worse. I thought the dampeners were dry and checked thinking that mite be it and they weren’t so I changed the dampeners to the upgraded with sleeve and its worse. Has anyone had this problem? Am I running to low of a head speed and why didn’t it do it from the beginning. Any input would be appreciated. Thanks, Joe |