What pinion are you running on the stock 600 motor. I am getting 1720 headspeed and 1840 in idle up. Would like to get 1950 or a little better. This is on a ten tooth pinion. Any suggestions? This is on the belt drive and i was wondering if switching to the torque tube drive would help any also? Thanks in advance for your help and suggestions.
05-12-2008 01:58 AM
JAGNZ Elite Veteran Location: Auckland, New Zealand
AFAIK, going UP in pinion size increases HS but decreases runtime.
pitbullracing Heliman Location: red hook new york us
thanx for the info guys we appreciate it we are new at this so info is much appreciated
05-12-2008 02:45 AM
babybeast970 New Heliman Location: Loveland CO U.S.A.
I'm running the 11t and getting 1950rpm for head speed. Make sure your not running the motor below 70-75% or you'll be bogging the motor. It runs more efficiently at or above 70% +.
I want a simulator that is like flying a real bird! Simulators are too easy!
