tgo
Senior Heliman
Location: HK
| No, you can't have 3 headspeeds + Gov on/off with MultiGov. The problem is not with 12FG, but MultiGov, it don't have a separate channel for on/off.
Here is what I can do with 12FG + MultiGov.
I need 2 headspeeds for my idle 1 & 2, I don't use Gov at normal mode. So I set speed 1 to below 1000, this will turn the MultiGov off, speed 2 to 2000 and speed 3 to 2100.
Next, you need to create a offset mixing and assign it a any switch you want, when you have the mix activated, it will set the Gov Speed output channel's position to anything same as speed1. This will turn the Gov off for all conditions. |
