rexxigpilot
Senior Heliman
Location: florida
| I'm looking for some servos for a 90 heli, probably MA Stratus. I was planning to use the BLS451 since I have had good results in a T-Rex 600N. However, after seeing the results posted by member playfair http://runryder.com/helicopter/t424587p1/ on various servos, I'm leaning more toward the BSL351 or 9351. playfair's tests indicate far more speed under load above 44in-oz for the 9351 compared to the BLS451.
So, my questions are:
1. has anyone had any bad experiences with the BLS351,
2. is the BLS351 worth the extra $30 compared to the 9351,
3. is the BLS451 the better choice after all considering the typical load on a 90 heli and the added cost of the other servos?
Other considerations, although unlikely, I may at some point use the servos in a 27% - 35% plank. The extra torque would be needed if I do. Also, I considered the JR8717 and 8711. Is the 8711 suitable for a heli, the 8717 not suitable for a plank (centering issues, current draw, etc.)? Their speed/torque specs look good for both.
Thanks in advance for the helpful input. |
