rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 530 ONLINE 73 EVENTS SEARCH REGISTER  START HERE
 
1 page247 viewsPOST REPLY
Esprit Model . Thunder Power RC . Real Raptors

.
.
Main Discussion > Can't get Negative Pitch
 
 
Cambyses
New Heliman
Location: Southern Utah

I am new been flying for 3 months and have a blade 400 after a crash and rebuilding it I can't get any negative pitch in fact and mid stick I Have +3 I don't know what to do, any help would be great

Thanks
05-09-2008 12:10 AM
 
 
TrexRookie
Key Veteran
Location: San Francisco, CA

adjust your linkages so that mid-stick is at 0 degrees. or check your radio settings. or set your servo horns to the appropriate angle.
05-09-2008 12:45 AM
 
 
JAGNZ
Elite Veteran
Location: Auckland, New Zealand

Get some local experienced help. It could be 100 things.

Jason Greenwood

Fury Extreme, 2X T600N's, Trex 500, DSX9 2.4
www.3dheli.co.nz
05-09-2008 12:51 AM
HOMEPAGE  
 
 
Swoop
Veteran
Location: Newark, DE USA

Jagnz is right. Lets try to narrow this down. What did you replace/repair after the crash?
05-09-2008 01:47 AM
 
 
Sam2b
Veteran
Location: Seattle, WA - USA

The manual should tell you what length the swash linkages should be in millimeters. I suggest buying a set of digital calipers and ensure the linkage lengths are as per the manual.

_Sam B_
05-09-2008 06:25 AM
HOMEPAGE  
 
 
RBlyden
Senior Heliman
Location: Pacific Northwest

Go back to set up. with both sticks at mid range set your pitch at zero degrees.

Great minds discuss ideas. Average minds discuss events. Small minds discuss people.
05-09-2008 12:59 PM
HOMEPAGE  
 
 
AltecLansing
Veteran
Location: Under the tire of a truck

make sure when you go back to reset the head to 0 pitch that your radio end points are set properly and your pitch curve is set properly before mechanical set up.

Man, I miss the eighties.
05-09-2008 01:29 PM
 
 
Hotwings
Key Veteran
Location: Florida, Port Charlotte and West Palm Bch.

maybe put new main shaft in upside down or didn't put head on far enough and jesus bolt is not going through hole inmain shaft, just sitting on top. i don't know.

Please cancel my clearance, I have the field in sight.
05-09-2008 01:36 PM
 
 
1 page247 viewsPOST REPLY
Mikado Modellhubschrauber . GrandRC . CanoMod

.
.
Main Discussion > Can't get Negative Pitch
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Tuesday, May 13 - 6:35 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie