AMainMaker
Key Veteran
Location: Nappanee,IN
| It is actually alot more forgiving than previous engines. I ran about atank or 2 in hover then leaned it a clik or two every tank after till peaked out. Keep in mind when tuning the low speed needle controls 60% of the throttle. So if in idle up hover and seems to over speed excessively when unloading the head after a maneuver chances are your low speed is to lean. I set my high speed first by doing climbouts from a hover till peaked then tune the low speed from there but make sure your low speed is on the rich side before peaking high end or else you could have a lean issue in mid before hgih end peak is reached.
Hope this helps
Jason
Thunder Tiger Rep
Wildcat Team Pilot
Kong Power Team Pilot
Sw!tchGlo
CY Enterprises |
