rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 346 ONLINE 45 EVENTS SEARCH REGISTER  START HERE
 
1 page215 viewsPOST REPLY
A Main Hobbies . Boca Bearings . Modefo's RC Helicopters

.
.
e-E-Flite Blade CP CX 400-3D > Blade 400 3D Crashed.
 
 
snelson111
New Heliman
Location: Sioux Falls, SD United States

I crashed my Blade 400 which took out both main blades and the landing gear. After installing the new parts I started it up and found that it shakes like crazy. I then replaced the main shaft which did not help...still extremely shaky. There doesn't seem to be any damage to the feather shaft. I'm going to replace it just in case but are there any ideas if that does not fix the problem? Thank you.
04-30-2008 10:13 PM
 
 
Drkhorse0646
Heliman
Location: Norfolk, Va - USA

if you didnt balance the blades and make sure the track is good. also look at the fly bar real good.

B400 500T ds3400G
04-30-2008 10:20 PM
 
 
speeddemon370
Veteran
Location: Spruce Grove, Alberta, Canada

Balance your blades. Check the tracking. Make sure one's not on backwards. High frequency (fast) vibrations are usually the tail. Low frequency ones are usually the head.

Ahhhhhhhhhhhhhh, duplicate topics. That's allright. Soon you'll figure out that this ground has been covered 10 thousand times before and the real "volume" of answers rests within the confines of the rr search engine.

Hope this helps.

with 2 ears and 1 mouth you should listen twice as much as you talk
04-30-2008 10:23 PM
HOMEPAGE  
 
 
snelson111
New Heliman
Location: Sioux Falls, SD United States

Crashed

Thank you. I bought a Heli-Max blade balancer. Good to go.
05-01-2008 03:24 AM
 
 
1 page215 viewsPOST REPLY
XHELI.COM . Autography FlightPower . Advantage Hobby

.
.
e-E-Flite Blade CP CX 400-3D > Blade 400 3D Crashed.
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Wednesday, July 9 - 9:16 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie