River Rat
Senior Heliman
Location: Mt Wolf, Pa.
| I found a few things wrong with the manual, includung what you found on the canopy mtg. I don't like the way they do it (with the ball type mtgs.) so I went for the screw type as the have diagramed in the manual. I bought a Quick 30 canopy mtg. kit and used the long ones in the back which are 41mm and they add enough for the clearance needed. The short ones, for the front, are not short enough, I had to cut them off redrill and rethread them to work. This mod makes the canopy to be able to just slip on so one does not have to bend the fiberglass to get it on, cracking the paint job. You still have to grind out some of the top fiberglass flange for clearance of the left and right pushrods.
hope this helps |
