RunRyder - New owner of Vibe 50

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 790 ONLINE 73 EVENTS SEARCH REGISTER START HERE

2 pages [ << < 1 ( 2 ) > >> ]

1088 views

POST REPLY

Modefo's RC Helicopters	.	XHELI.COM	.	Autography FlightPower
	.		.

JR Heli Vibe - Airskipper - Sylphide - Venture > New owner of Vibe 50

tchavei
rrProfessor
Location: Portugal

V paddles here (tried superstubz but didn't like them for my style)

Tony

--------------------
"Perfection and patience usually walk side by side..."

05-05-2008 01:53 PM

HOMEPAGE

sso2112
Heliman
Location: Schaumburg IL

That could be my problem ? I don't know why I put them on

05-05-2008 01:55 PM

tchavei
rrProfessor
Location: Portugal

Can't see the stock paddles making noise. have you checked gear mesh and backslash? What kind of a noise is it?

Tony

--------------------
"Perfection and patience usually walk side by side..."

05-05-2008 02:09 PM

HOMEPAGE

sso2112
Heliman
Location: Schaumburg IL

I checked and rechecked could not find anything wrong with the gears . the only thing I found was the paddles were loose where the plug is in the plastic ? The noise sounds like a vibration ?

05-05-2008 02:22 PM

cyr
Heliman
Location:

Your vibration comes from the torque tube. I have had the same problem. Try with the V90 TT bearings and everything will be OK.

05-05-2008 04:37 PM

sso2112
Heliman
Location: Schaumburg IL

cyr ....Is that just the tt bearing in the tube on the shaft I should change ?

05-05-2008 07:02 PM

tchavei
rrProfessor
Location: Portugal

The Vibe TT is usually strait as an arrow. I can't see vibration coming out of there unless you mounted the bearing at the middle creating resonance

Tony

--------------------
"Perfection and patience usually walk side by side..."

05-05-2008 07:44 PM

HOMEPAGE

sso2112
Heliman
Location: Schaumburg IL

I mounted the bearing like they said , but the bearing was loose on the shaft ? This is my 3 JR heli and I never had this problem . But the vibration is only with very high head speed . Other than that it flies great .

05-05-2008 08:03 PM

tadawson
Key Veteran
Location: Lewisville, TX

The instructions clearly showed (at least on my kit) to attach the bearing to the shaft with the green locktite that came with the kit, which makes it a totally solid attachment. What happened to me the first time I tried to put it in the boom is that the bearing popped out of the rubber holder, and I had to do it again . . .

- Tim

05-05-2008 08:20 PM

sso2112
Heliman
Location: Schaumburg IL

I had no problem with the glue on the bearing . I'm use to that with all the vibes I have . This bearing was loose on the shaft more than the rest of my helis ? I still think the paddles are off on weight or something with them . I will try a different set of paddles to rule this out . I do have to say I had a problem with installing the lead in the paddles on 1 of them . The lead was not completely stright or round before I tried to install it . That might be it !

05-05-2008 08:27 PM

cyr
Heliman
Location:

sso2112, you can trust me, I have had the same problem. The bearing has too much play into the caoutchouc ring.
Try with the V90 ref, and the O-ring, it will be good.
You can also try to put teflon around the bearing before put in in the caoutchouc ring, but itonly works for flights.

cyr

05-05-2008 08:31 PM

2 pages [ << < 1 ( 2 ) > >> ]

1088 views

POST REPLY

Advantage Hobby	.	Revolution Models	.	CarbonXtreme
	.		.

JR Heli Vibe - Airskipper - Sylphide - Venture > New owner of Vibe 50

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic