After about a gallon through my 90 3D there appears to me to be an excessive amount of play in the swash to the point I wont fly the model I have tweaked the bolt to take out play but this has not solved the problem. Any usefull comment would be appreciated
04-26-2008 08:54 AM
JAGNZ Elite Veteran Location: Auckland, New Zealand
Talk to the retailer, they are not known for this problem (R30, 50 or 90). I'd say it is a one off.
THANKS as you say they are not known for this, and I will show the retailer for sure, unfortunately yesterday I asked if they had another one for me to compare with and they didn't, so I will take the model in to them
04-26-2008 08:28 PM
JAGNZ Elite Veteran Location: Auckland, New Zealand
Okay well been too busy to get the swash to the shop, but have had a close look at it. there is a metal cut away ring which fits into the inner race of the lower bearing and there is play between these two parts in ONE AXIS so it can rock a bit if you like. I have never seen or heard of this before and think it is a tolerance problem. i have used some thin oil tolerant locktite wicked between the two parts being VERY carefull to not allow any into either bearing race. If this doesn't fix things then I will probably just get a quick UK one
