rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 316 ONLINE 45 EVENTS SEARCH REGISTER  START HERE
 
1 page540 viewsPOST REPLY
HeliHobby . Ron’s HeliProz South . Century Helicopter

.
.
Photos and Movies > Wring out the 600N with a TT53 engine
 
 
Sam2b
Key Veteran
Location: Seattle, WA - USA

Pilot: Sam2b
Video by: PilotCK

A buddy of mine video'd my TT53 engine in action with the above listed specs. However I realized after the day of flying the reason the engine was bogging and fading power was my glow plug needed to be changed. I'll post another video with a fresh plug later on.

_Sam B_
04-23-2008 02:39 AM
HOMEPAGE  
 
 
amitush25
Senior Heliman
Location: netanya - israel

hi

listen i dont think its your plug more that reason thst you have low RPM..
i bat that you run under 2000 RPM.
that heli need RPM to rock man!

but very nicr flying man.

align T-REX600n pro, 9541, gy 401, radix, DX7
04-23-2008 10:32 AM
HOMEPAGE  
 
 
Sam2b
Key Veteran
Location: Seattle, WA - USA

No, actually since the plug replacement I'm able to do low aileron tictoks all day long (for example), so that made a total difference. 2050RPM head speed does very well when the engine is tuned and running properly.

Here is my configuration:
_Trex600N Pro
_Hatori SAB50 Muffler
_CoolPower 30%
_2,050RPM head speed (17,425 engine RPM)
_+-14 degrees Collective
_8 degrees cyclic
_CY Radix 600mm blades, CY Super Stubz paddles.
_Futaba 9252 on throttle
_Fourth hole out on the servo horn, last hole in on the carb.
_Throttle servo linkage squaring according to this article.
_Aerospire MultiGov with very aggressive settings.
_Align Metal fan

_Sam B_
04-23-2008 06:54 PM
HOMEPAGE  
 
 
Dino Spadaccini
Key Veteran
Location: USA

needles

You might and try and open up the low end some as it carries over for the mid range we have found that you should richen up the low end about 1/4 turn from the factory setting. Head speed should be set at about 2100 to 2200 the TT 53 is a high rpm motor making its power at a higher rpm than the OS motors. Doing all that will help the motor not fad when your feeding in 14* of pitch and cyclic hope that helps Dino

Team Thunder Tiger
Team Futaba
CY Enterprises
Flight Power
Morgan fuel
Omi
Rev max
04-23-2008 08:45 PM
HOMEPAGE  
 
 
OICU812
rrProfessor
Location: Resources Capitol, Canada

at 5:11 I was waiting for blade stall...

...Once upon a time there were Nitros, flybars and frequency pins...
04-24-2008 09:10 AM
 
 
1 page540 viewsPOST REPLY
MTA Hobbies . MRC/Altech Marketing USA . JR-Spektrum

.
.
Photos and Movies > Wring out the 600N with a TT53 engine
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Sunday, July 6 - 10:30 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie