RunRyder - WT603 carb

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 809 ONLINE 46 EVENTS SEARCH REGISTER START HERE

1 page

532 views

POST REPLY

Autography FlightPower	.	Advantage Hobby	.	Revolution Models
	.		.

Gasser Model RC Helicopters > WT603 carb

mickt
Senior Heliman
Location: North Yorkshire UK

Hi Everyone

I have just bought the 603 carb to put on my xcell . I've just had a quick look and the throttle linkage appears to be reversed on it, ie i cant use the setup i had before, Is there a way to reverse the throttle?

I don't want to strip the new carb for no reason

Cheers

Mick

04-04-2003 Over year old.

Ford Rollo
Senior Heliman
Location: Surprise, AZ

Reverse Throttle?

Your question isn't clear. You might need a custom throttle arm or you can hook your throttle up to the top of the carb.
Can you describe why you think you need to reverse the carb?

Ford

450 SE V2 and 600N Pro

04-05-2003 Over year old.

Safe_Cracker
Key Veteran
Location: Chicago, IL

Throttle linkage?603 carb?

What do you mean being reverse?Did you try reversing the servo?How about a picture..

04-05-2003 Over year old.

Billme
Key Veteran
Location: MS

Mick, you should just be able to put the Xcell custom arm on, and bolt the carb to the engine without any mods...
Bill

04-05-2003 Over year old.

mickt
Senior Heliman
Location: North Yorkshire UK

Hi Gents,

Sorry for the confusion, not got access to a camera yet so will try to describe it better.

With the carb bolted on, looking down on it the fuel bulb is on the right and the choke lever is front centre, the throttle arm is pointing to the left and when opened moves to the rear which causes it to go behind the frame which fouls the servo rod on the frame.
If i reverse the throttle arm on its one way mount it then fouls the mount for the fuel return nipple.

I assume the xcell custom arm replaces the stock arm on the carb, please excuse my ignorance but gas helis are still a black art up here in Yorkshire.

Your repiles are much appreciated

Mick

04-05-2003 Over year old.

ddavison
Veteran
Location: Brownsville, Pennsylvania

If you haven't already, just remove the stock 603 throttle arm and use the Xcell arm off the stock carb. You can also disassemble the choke assy. and rework it to get the choke lever on the bottom. Questions, let me know.

DaveDavison, Miniature Aircraft Field Rep.

04-10-2003 Over year old.

SteveH
rrProfessor
Location: Texas

I just put a 603 on my X-Cell and the only thing I had to do was remove the stock X-Cell throttle arm from the 167 carb, drill it out to fit the throttle shaft on the 603, and install. Maybe there are 603s and then there are 603s?

SteveH

SteveH
Magnum Fuel
AMA76186

04-10-2003 Over year old.

mickt
Senior Heliman
Location: North Yorkshire UK

Hi Gents,

thanks for the replies, In the end I used a steering arm off an undercarriage, drilled out to size and fitted over the throttle shaft. Tried it out tonite and it seemed to work a treat

Thanks again

Mick

04-11-2003 Over year old.

1 page

532 views

POST REPLY

CarbonXtreme	.	Midland Helicopters	.	HeliProz
	.		.

Gasser Model RC Helicopters > WT603 carb

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic