slider46
rrProfessor
Location: Gloversville, NY
| Most 3D guys use the bocca bearings just for the quality, I don't remember reading about anyone using ceramic bearings as the way to go but try posting it in the rex forum or the mini for a better idea what you need... These guys have alot of experience with this stuff.... 
Tom..... No "D" flying.... |
)and while I'm waiting for batts to charge to fly the MINI decided to start the HBK....so I'm staring at the head...still trying to figure out what is not right as the pitch is still uneven..and I just couldn't seem to get it set up with all arms level and everything right...I've been at this for weeks....building and re-building the head...re setting up ....EVERYTHING........today it hit me like a brick wall...stared me in the face.....somewhere along the way I put one of the control hoops in upside down....there is a short side link and a long side..short side to the flybar control arms...long side to the upper mixing arms....I HAD ONE REVERSED......no wonder I could not get the head set up right.....DUH.....man this is cool...both helis back and even better than ever...I was pissed last week but now I'm happy as can be...the mini is better than new and the HBK will be up tomorrow and I'll give an update....now I can start putting the HBK through the paces as I'm 99% positive this is the cause of all my problems...well gotta go...One round of flights before dark....be back later.......man its always something simple.....I've had this head apart DOZENS of times looking for this
