RunRyder - Need help on CC Phoenix 45A

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 770 ONLINE 73 EVENTS SEARCH REGISTER START HERE

1 page

225 views

POST REPLY

Real Raptors	.	Mikado Modellhubschrauber	.	CanoMod
	.		.

e-BEAM Beam E4 > Need help on CC Phoenix 45A

n9'ers
New Heliman
Location: Jakarta, Indonesia

Guys, can anyone help me with the ESC settings on Phoenix CC 45A? I'm running 430XL 3700Kv motor, I tried to set the ESC but seems like it has no power. I used Align ESC before on the motor and has no problem.

04-22-2008 05:19 AM

rcman
Veteran
Location: Logan, Utah

Can you tell us what you have done so far?

How did you program it or did you just plug it in and go fly?

I am sure we can help

David

04-22-2008 05:50 AM

n9'ers
New Heliman
Location: Jakarta, Indonesia

Here are the settings that im running at:

1. Cutoff Voltage = 9 V
2. Current Limiting = Insensitive
3. Brake type = Brake disabled
4. Throttle type = Governor mode - high RPM range
5. Electronic timing advance = High advance timing
6. Cutoff type = Soft cutoff
7. Soft start = Fast start
8. PWM switching rate = 11 KHz

im using 430XL motor (3700 KV) with 13 pinion on BEAM E4, Evolite 11.1v 2500 mah 20C. any idea whats wrong? thanks in advance..

04-22-2008 08:51 PM

rcman
Veteran
Location: Logan, Utah

It dosen't look like anything is wrong with your programing.
The only other thing that I would say is you need to calabrate your throttle, or maybe you already did that as well

David

04-22-2008 09:40 PM

Pistol_Pete
Elite Veteran
Location: Tampa Bay non-Buccaneer

Quote
1. Cutoff Voltage = 9 V 2. Current Limiting = Insensitive 3. Brake type = Brake disabled 4. Throttle type = Governor mode - high RPM range 5. Electronic timing advance = High advance timing 6. Cutoff type = Soft cutoff 7. Soft start = Fast start 8. PWM switching rate = 11 KHz

not knowing your radio throtle curves...

heres my set up same heli and motor...my bet is once you change #5 and #8 all should be good.

1. auto lipo
2. disabled
3. disabled
4. low for starters then high when ready for stunts.
5. standard
6. soft
7. soft
8. 26khz

Let us know how it went...

Best of luck!

<><>...the lunatic is in my head...<><>

04-23-2008 11:10 PM

HOMEPAGE

n9'ers
New Heliman
Location: Jakarta, Indonesia

it worked, but i still didn't get enough power. Maybe the motor starting to wear off.By the way, which motor is recommended for this heli. I heard scorpion 2221-6 had bad flight time. Any suggestion on motors, considering the flight time and performance, and also any recommended ESC ? thx..

05-02-2008 02:58 AM

Eric Cartmeniez
Senior Heliman
Location: Los Angeles California

Try the Scorpion HK 2221-8. More of a sport flying motor

http://modefosheli.com/inc/searchre...orpion&n=346847

HOW DO I REACH THESE KEEEDS!!!!!?????

05-02-2008 03:47 AM

1 page

225 views

POST REPLY

A Main Hobbies	.	Boca Bearings	.	XHELI.COM
	.		.

e-BEAM Beam E4 > Need help on CC Phoenix 45A

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic