vangeliz
Heliman
Location: Bergen, Norway
| A colleague of mine has just bought a 7C 2.4 FASST set together with the Phoenix simulator.
Problem we have is that we are unable to get the radio to work with the simulator. I guess it's because the radio is not in PPM mode, but we can't find the place the set it either. The manual for the 7C does refer to setting the modulation, but there's no place to actually do it. I would expect to find it under the PARA menu, but no such luck. Does the 7C 2.4 FASST actually support PPM?
So, the second thing to try was to enable trainer mode. However, when enabling this it does not look like it is possible to actually get from OFF to ON when using the trainer switch. Would it require a second transmitter to be connected before ON would show when flicking the switch?
I'm cities away from the equipment so I can't do any hands on checks. Anyone got any good ideas? anyone with a 7C FASST kit that could try enabling the TRAINER function without anything connected and see if it will allow you to get to ON.
Any help appreciated.
Regards,
Thomas
Regards,
Thomas |
