RunRyder - Need help setting up a T12Zh with Hilicommand

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 718 ONLINE 21 EVENTS SEARCH REGISTER START HERE

4 pages [ << < 2 3 ( 4 ) > >> ]

2398 views

POST REPLY

Model Rectifier Corp	.	Heli Wholesaler	.	3D Heli Depot
	.		.

Aerial Photography and Video > Need help setting up a T12Zh with Hilicommand

avalon
Heliman
Location: Sydney Australia

Thanks. I did buy the software but my lap top did not have a coms port. I have just managed to find a USB coms port adapter and got the software to work. It all makes a bit more sense now. The gray wire can be used for controlling rate/HH as the mode changes on the screen when I flick the switch. So far so good. One thing I am not sure about if I change the travel settings under mixer nothing happens at the servo. Do I have to write this to the Helicommand before it will show the changes? With any luck I will test fly this tomorrow.

There I was inverted nothing on the clock but the makers name and only the joystick in my hand

10-04-2008 12:50 PM

rerazor
Elite Veteran
Location: Mich.

Yes, all changes have to 'write' in the software for it to take effect.

10-04-2008 12:54 PM

c130pilot
Senior Heliman
Location: Windsor, CO

Noobs,

You rock! Thanks for the crazy detailed post. I'm using a 9CHP but it was good enough for me to be able to apply it all to my radio. Thanks for the help. Not sure I could have set this crazy thing up without your post - at least not as quickly. Just test flew it a few minutes ago and it worked as advertised! Now I have to go to work on fighting some right drift, but other than that it works well.

One question for you or anyone else who wants to chime in...

I've assigned the gain control to the left slider on my 9CHP. The way I have it is that when the slider is centered, the HC is off, when the slider is down it's in position mode with increasing gain as I slide down further, and in horiz mode with increasing gain as the slider goes up... is this how others are doing it? The only downside is finding center while flying... it does beep in the middle, but I just want to see how others are setting this up.

Thanks!
Tim
.

Help! I'm umop apisdn

10-06-2008 12:33 AM

HOMEPAGE

nooobs
Key Veteran
Location: Toronto, Canada

You're very welcome Tim.

That's exactly how I have mine set up.

On my 12z there is a "notch" to let you know it's in the center as well with the "beep" sound. I've maximized the volume. When flying in the winter with the radio mitt it is very difficult to hear the sound. So the "notch" helps.

10-06-2008 12:41 AM

HOMEPAGE

4 pages [ << < 2 3 ( 4 ) > >> ]

2398 views

POST REPLY

JR-Spektrum	.	Gyro Hobbies	.	E-flite
	.		.

Aerial Photography and Video > Need help setting up a T12Zh with Hilicommand

PRINT TOPIC

Advertisers

Subscribe to This Topic