jimboflies Elite Veteran Location: Beaumont, Texas;
| 
I just very carefully dremeled (cut) the frames to size and I used a 2.5mm tap to tap out the mounting holes in the 2mm frames , that way I would not need to use any back-up nuts on the mounting screws cause there is very little room around the main shaft for mounting the servos... Hope this helps twinring.. If you need any specific pics let me know... These s9650 servos are the best servos for the EP8 , none of the Hitecs can even compare to the s9650 , plus I am running them on 6 volts , awsome control and centering , you cannot stall these s9650`s like the HS-81/85 servos...

Quick of Japan RULES EP8v2 EX x 2 Trex450v2 EP9 QWW Bat 26cc gasser |