Tail_BoomStrike
Veteran
Location: Virginia Beach
| I bought an HDX500 tail drive belt and compared the teeth on the belt.... X500 belt teeth distance is wider, with that I think the teeth on the X500 tail pulley will also have wider pitch...... Yet, I did the mod before that findings also...... If your running HS below 6000rpm, tail is pretty solid, at the expense of higher current draw...... Higher HS than that, tail is too sensitive with 65mm tail blade and might require shorter tail blade..... I will try to get the X500 CF Tboom, front tail drive pulley, and stock X500 14T tail pulley....... Their belt is longer, so I assume the tailboom is probably 20mm longer, that I assume will give a little added tail authority on the Lepton....... |
