rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 833 ONLINE 25 EVENTS SEARCH REGISTER  START HERE
 
1 page292 viewsPOST REPLY
Revolution Models . CarbonXtreme . Midland Helicopters

.
.
Flybarless Rotor Head Systems > Need some advise on how to phase a 5-bladed rotorhead!
 
 
avconslt
Senior Heliman
Location: Houston, Texas

I have a new 5-bladed Penta Rotorhead from lightning Heli, which is going on my Trex 450, which is going into my Hughes 500E fuselage. I understand that the phasing of the swashplate is critical. Can anyone give me some instructions on how to accomplish that? Thanks.

Richard
03-21-2008 12:59 AM
 
 
Super-Hornet
Veteran
Location: Singapore

The easiest method is:
- Take any blade grip as the reference.
- Measure the angle from the center of that blade grip (or at the center of the blade mounting hole) to the swash plate linkages that it is connected to. U should have 90Degree


SH
03-21-2008 02:27 AM
 
 
Super-Hornet
Veteran
Location: Singapore

Alternate method:
- Align the inner swash plate linkage in line to the outer swash plate linkage for the rear side (Your TRex swash plate is 120Degree and one of the linkage is at the rear side right?)
- Adjust that blade grip that it connected to that swash plate linkage, to the 90Degree of it. That will be at the right side of the heli (seeing from top with tail facing u) if your rotor spin Clockwise and if u using leading edge control. It will be on the left side if it is spin CCW if u using leading edge control.

SH
03-21-2008 02:32 AM
 
 
avconslt
Senior Heliman
Location: Houston, Texas

I think I have got it! Do you have any photos showing it? My blades turn clockwise. Thanks.

Richard
03-21-2008 04:07 AM
 
 
Super-Hornet
Veteran
Location: Singapore

I do not have 5 bladed manual... but if u check out Hirobo manual, u can see it. I cut out that portion for u to see. Remember, it doesn't matter how many blades u have, u use one blade for reference will do.

03-21-2008 04:30 AM
 
 
avconslt
Senior Heliman
Location: Houston, Texas

Thanks Super-Hornet that helps alot!

Richard
03-21-2008 04:55 AM
 
 
1 page292 viewsPOST REPLY
HeliProz . ZoomsHobbies . HeliHobby

.
.
Flybarless Rotor Head Systems > Need some advise on how to phase a 5-bladed rotorhead!
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Friday, January 9 - 2:55 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie