RunRyder - Here is my Wicked 3DX 500

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 592 ONLINE 41 EVENTS SEARCH REGISTER START HERE

1 page

1056 views

POST REPLY

Ron’s HeliProz South	.	Century Helicopter	.	MTA Hobbies
	.		.

e-HeliDirect Outrage - HDX 300-600 > Here is my Wicked 3DX 500

Speed stick 3D
New Heliman
Location: Las Vegas, NV

Well, I got is all done.. Just in time for the Big Competition/Funfly here in vegas... Anyways I will get videos once i get the head linkages made up.. Enjoy the pics and here is my setup..

3DX 500 SA V2
850 KV 3DX motor
HobbyWing 60 Amp ESC
Maxwell DS 260 MG (cyclic servos)
JR 7703D Gyro
Hitec HS 5925 MG Digital (Tail servo)
Kong Power 3200 mAh 4 cell 25 C Li-po
Spectrum AR 6100 E (V1.2)
Spectrum DX6i (2.4)
Align 425 mm CF Main Blades
Align T-rex 500 Tail Blades
Flybarless
Fiberglass Canopy
Propeak Progity II Charger
Astro Blinky Balancer

Thanks Team Kong Power-Devin LeBlanc

03-17-2008 01:44 AM

audio131
Senior Heliman
Location: swansea , mass , usa

looks nice,,but how come you are flying with the dx6I radio? it is a very slow radio...

"LOWER LOOKS BETTER"

03-18-2008 12:17 AM

eggmcmuffinplz
Key Veteran
Location: Valencia, CA

You really like flybarless dont you

Anything you can do, I can do inverted
Super Auto Master Scott
Rexy 450 and 500-DX7

03-18-2008 12:20 AM

Speed stick 3D
New Heliman
Location: Las Vegas, NV

DX6i

its actually not that slow.. Alan Szabo Jr put it on his 600 and he said it was just a little slower than the DX7... I like how it flies and i got a really good deal on it... And yes i do love my flybarless..

Thanks Devin

03-18-2008 07:48 AM

audio131
Senior Heliman
Location: swansea , mass , usa

a little slower? you should go see the post that shows latency charts -it is slower than my old 8103 pcm , it is even slower than the hitec optic 6,, have you flown with it yet? if not try it, let me know how you like it,,i just got the futaba 7c 2.4 it is 2 points faster then the dx7 and has a lot more programing and costs less than the dx7,, i would recommend it to other flyers...

"LOWER LOOKS BETTER"

03-18-2008 12:09 PM

Speed stick 3D
New Heliman
Location: Las Vegas, NV

ya.. Im a hard 3D pilot and its plenty... my 7C 72 was slower than this.. the Futaba Fasst just sucks.. My hobby store has had 6 Futaba Fasst tx's returned due to lock outs.. Stay away from Futaba 2.4

DOne!

03-19-2008 04:59 AM

audio131
Senior Heliman
Location: swansea , mass , usa

i really don't think you know what you are talking about,i happen to work for a hobbystore/online store and have all the 2.4 radios here and have not seen the futaba 2.4 lock out yet and it is a faster radio than the dx7 or and has alot more programming..,

"LOWER LOOKS BETTER"

03-19-2008 06:34 AM

bigdog714
Senior Heliman
Location: Chardon, Ohio U.S.A.

This is a good discussion, I started with a DX6, it is a nice tx easy to understand and program, and I never had a signal loss or any problems at all. I just switched to a Futaba 9CHP Super with a Spektrum module, I was looking for more options going into my first nitro, and I love it. I feel far more "locked in" to my helis than I ever did with the DX6, I am very happy I switched to Futaba, and with the Spektrum module I get the best of both.

QJEP8v2EX
Align T-Rex 600EP
Align T-Rex 600N
EVO 90

03-26-2008 12:58 AM

mrman0901
New Heliman
Location: Mattapan MA

I started with a dx7 and moved to a futaba 7c. It is the worst radio i have own and it has locked out on me three or four times. money not well spent and since have moved back to my reliable dx7!!!

Fly hard, safe, and have fun doing it !!!

06-02-2008 12:15 AM

clive45
Veteran
Location: NSW Australia

Solve all your problems Go JR DSX9. HeHe

He who dies with the most toys is none the less DEAD

06-03-2008 12:41 PM

1 page

1056 views

POST REPLY

MRC/Altech Marketing USA	.	RCHover	.	RC-Direct
	.		.

e-HeliDirect Outrage - HDX 300-600 > Here is my Wicked 3DX 500

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic