fenderstrat
Elite Veteran
Location: Aston,Pa
| I've been seeing lots and Lots of posts about maintanence,set up ,and heli repair,lately....so I did some research,read all the manuals and have compiled what I think is the most COMPLETE,COMPREHENSIVE,DETAILED,and ACCURATE set up guide...on R/C heli there is....this is a general guide and can be applied to ANY heli not just the HBK
STEP 1 if its loose,and its not supposed to be, tighten it
STEP 2 if its tight and its not supposed to be,loosen slightly
STEP 3 if it spins and/or rotates straighten and/or balance it
STEP 4...PAY CLOSE ATTENTION...THIS IS THE MOST IMPORTANT STEP....go fly your heli as much as possible..till something breaks,or wears out
STEP 5 replace any broken/worn out parts
STEP 6...go to step 1
THERE you have it, my comprehensive maintanence/set up guide...I spent many hours compiling this info.....if you follow this guide,you will have many years of happy R/C flying.....enjoy...FENDER
PerformancePlusRC field rep
COMPASS helis field rep
Mini Titan/SE
HBK2
Futaba FASST |
....I was thinking about it, and steps 1,2and 3 really do sum it up.....1)tighten everything up,2)make sure the belt, gear mesh and sliders are moving freely...3)all shafts straight and blades balanced...go fly.....we dont need to break out the digital torque wrench and check the frame screws on a 150 dollar heli
