RunRyder - 3dmp Questions

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 663 ONLINE 72 EVENTS SEARCH REGISTER START HERE

1 page

413 views

POST REPLY

Midland Helicopters	.	HeliProz	.	ZoomsHobbies
	.		.

Henseleit 3DNT - Rocket - 3DMP > 3dmp Questions

bathmagic
Senior Heliman
Location: Berwick,Victoria, Australia

Guys, i have managed to pick up a second hand one of these machines since i sold my last one i was hopeing to find another one ( yeh i know i shouldnt have sold the last one)

So here we go

Where can i get some parts from ??

what tail blades are the go Size and Brand ? i have heard that useing glass/carbon blades is no good as they can rip of tail grips off ?

the model has a jazz 55-10-32 and a Platenburg 300-30-A4 heli Motor
are these any good ?

Also what is the KV is the platenburg ??

i have a spare Neu 15152y and a Z-Power 50 floating around and another CC85 should i use those instead ?

Main blades ??? What to use here ? can it take 620 mains ??

IM itching to get this in the air as i need spare amin shaft, spindle, flybar and links to the head.

Thanks Dale

3DMP , Vbar 600 "Innovation" The key to success !

03-08-2008 08:43 AM

HOMEPAGE

laughingstill
Key Veteran
Location: Gainesville, Fl, USA

Hey Dale!
You can get parts from www.revolution-models.co.uk or directly from Jan henseleit. They are usually only a 3 day wait for us in the US.

You are not supposed to use the carbon tail blades because the tail is soo stiff. The CF blades will not allow the tail to "give" any and using them will lead to a bad flight day

The power setup you have in the heli now is very powerful and I would suggest using it unless it has problems.

fFor main blades, I would (and do now) use the CY 600mm Radix blades. They work very well and are smooth. I do not know about using 620mm blades but if Jan does not recommend it, I would not do it.
Do you have any pics? I hope this helps.....Ron

3DMP-E, Logo 6003D, Logo103D Carbon and Trex 450se Flyin Firefighter

03-08-2008 09:20 AM

keisersouzhai
Heliman
Location: Australia

Your other bet would be cyberheli... everything I order from there usually ends up on my doorstep within the week... Order parts thursday - get them following monday.

05-04-2008 07:22 AM

helinutz
Senior Heliman
Location: Bournemouth, Dorset, UK

620 blades will overlap the tail, so I wouldnt use them.
I have been using SAB 600 blades for the last 3 years on mine with very good results.
Tried a set of Radix 600's, but found them to be a lot more "bitey" and didnt suit me as well, but that may be a personal preference thing

Think of how stupid the average person is, and realize half of them are stupider than that

05-04-2008 06:02 PM

keisersouzhai
Heliman
Location: Australia

Quote
what tail blades are the go Size and Brand ? i have heard that useing glass/carbon blades is no good as they can rip of tail grips off ?

The MP had this problem when it first came out but Jan changed the parts so this wouldnt happen any more.

Quote
Main blades ??? What to use here ? can it take 620 mains ??

I wouldnt go above 600 myself. It really depends which head you are using... If you are using the head the first 3dmps came with Probably not as it is not as robust. The MPs that came out with the XL head will take it for sure. In either case you will need to be careful of the main blades hitting the tailblades

Quote
IM itching to get this in the air as i need spare amin shaft, spindle, flybar and links to the head.

Don't blame you one little bit... As I said in previous posts try cyberheli... they're a little closer to us Ozzies

05-04-2008 11:51 PM

1 page

413 views

POST REPLY

HeliHobby	.	Ron’s HeliProz South	.	Century Helicopter
	.		.

Henseleit 3DNT - Rocket - 3DMP > 3dmp Questions

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic