rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 810 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
6 pages [ <<    <     1     ( 2 )     3      4     NEXT    >> ]7244 viewsPOST REPLY
XHELI.COM . Autography FlightPower . Advantage Hobby

.
.
e-Thunder Tiger Raptor E Series > E325 Turnigy E500 motor
 
 
eric_b
Key Veteran
Location: Denver, CO, USA

I'm tempted to try the 15t pinion, but I think I'd better wait until race day. It might be a one-shot deal.
03-22-2008 11:51 PM
HOMEPAGE  
 
 
mad_box
Heliman
Location: CZ

Great video Eric. What is your flight time?

Pls, sorry my English.
03-23-2008 06:24 PM
HOMEPAGE  
 
 
eric_b
Key Veteran
Location: Denver, CO, USA

On the flight that the video was taken, it only took ~1275 mah out of a tp v2 2200 pack during the ~3 minute flight.

I actually am flying the mini titan with an old futaba t6xas airplane radio, and as such I don't/can't time my flights (no timer).
03-23-2008 11:15 PM
HOMEPAGE  
 
 
bugsb
Veteran
Location: rothwell//northants UK

i just fitted the 12t pinion and did a quick hover in the garden i think this head speed what ever it is is near or the same as the 4 cell setup i had so this should do me fine
Ron
03-25-2008 01:34 PM
 
 
cybernero
Heliman
Location: Seoul, Korea

Installation problems with Turningy E500 ...

Hello.

I've been ordered and tried to install the motor
on my Mini-Titan. (My motor's color is orange, not green)

However, when tried to install the motor on her mount,
I found the position of bolting hole is not match.

Please Look at the pictures closelt as shown below,
you find there're some problems.

The two holes are not at the same location.
It's position is slightly not in line.



Are there anyone in the same problem?
04-01-2008 08:32 AM
 
 
eric_b
Key Veteran
Location: Denver, CO, USA

I guess the new motors are gold/orange instead of green. That makes the green ones worth more, LOL.

repost from above: Oh, yeah, I forgot that I had to drill out the MT motor mounting plate. The holes do not match, but it is no big deal to make the turnigy motor fit.

Just drill out two of the holes a bit, or enlarge/elongate with a dremel to fit.
04-01-2008 11:46 PM
HOMEPAGE  
 
 
cybernero
Heliman
Location: Seoul, Korea

Thanks Eric ^^



Thanks Eric.
I should manage to fit the motor tonight.

Good luck!
04-02-2008 01:10 AM
 
 
hotairflyer
Senior Heliman
Location: Northern AZ

Mine was off exactly like the pictures. A few swipes with the Dremel got the holes slotted to match.

Lama2,T-rex, Mini Titan, BL-BCPP, B400, PicooZ
04-04-2008 03:03 AM
HOMEPAGE  
 
 
bugsb
Veteran
Location: rothwell//northants UK

not sure if it was the cold or not but after fitting the green motor well mine was gold
flying time is down by half just f/flight no 3d /loops/rolls
but the battery was only just getting warm the motor was cold
any ideas
Ron
04-07-2008 09:30 AM
 
 
bugsb
Veteran
Location: rothwell//northants UK

got 5 flights today trying differant packs/li-po
warmer 11deg c flight time still down but by about a 3rd now motor cool li-po packs just warm one hextronic pack puffed but it is the v1
i think i will drop a pinion and see what happens
Ron
04-09-2008 06:23 PM
 
 
bugsb
Veteran
Location: rothwell//northants UK

i dropped to a 11t pinion and had 6 flights today
i think i have found my perfect setup with this motor
motor cool li-po just warm head speed just under 3000rpm but on the last 2 flights the head speed jumped as if the motor was run in a great feeling
now i have good flight times approx 8 mins with some left in the li-po a good head speed and a well performing /responsive heli
Ron
04-10-2008 05:45 PM
 
 
m34life
Senior Heliman
Location: Bury St. Edmunds, UK

LOL, that head speed is insane!!! Imagine that head speed on a 600!

The above post courtesy of you tax dollars hard at work. Enjoy. TT Minit Titan, Spektrum DX6i
04-12-2008 12:18 AM
 
 
Brovic777
Elite Veteran
Location: Los Angeles, CA

Where else can I buy this besides HobbyCity?

Killer Beam E4 450
Check out my HD Gallery
04-12-2008 12:30 AM
HOMEPAGE  
 
 
bugsb
Veteran
Location: rothwell//northants UK

i have 2 on back order one for anther club member i have no idea of any other seller
thanks to eric b for finding this motor
Ron
04-12-2008 07:39 AM
 
 
Brovic777
Elite Veteran
Location: Los Angeles, CA

I just ordered the E500 motor to put on my Beam E4. If this motor is balitic on the Mini-Titan, its gonna be crazy on my new heli. Might have to sell my Scorpion 6 V2 now!!!!

Killer Beam E4 450
Check out my HD Gallery
04-19-2008 08:03 AM
HOMEPAGE  
 
 
eric_b
Key Veteran
Location: Denver, CO, USA

Pic of the green meanie in my Mini Titan

04-23-2008 03:24 PM
HOMEPAGE  
 
 
thegamer
Heliman
Location: Spain

Hi,

what flybarless system are you using in your MT?
04-23-2008 03:42 PM
 
 
eric_b
Key Veteran
Location: Denver, CO, USA

Skookum Robotics SK360
04-23-2008 05:43 PM
HOMEPAGE  
 
 
Brovic777
Elite Veteran
Location: Los Angeles, CA

How many days did it take for you guys to get your motor?

Mine's been stuck on the processing status all week. Says they got like over 100 in stock.

Killer Beam E4 450
Check out my HD Gallery
04-23-2008 05:49 PM
HOMEPAGE  
 
 
Anton A
Heliman
Location: Umeå - Sweden

Got my motor today took some time so i have got a scorpion 2221-6 and 55A ESC but i will take the new motor for a test spin later this week =)
04-28-2008 03:28 PM
 
 
6 pages [ <<    <     1     ( 2 )     3      4     NEXT    >> ]7244 viewsPOST REPLY
Revolution Models . CarbonXtreme . Midland Helicopters

.
.
e-Thunder Tiger Raptor E Series > E325 Turnigy E500 motor
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Wednesday, December 3 - 3:13 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie