peter84
Senior Heliman
Location: Lancaster, PA. USA
| CSM v10 using XPSuggest you try the following;
E-mail the CSM tech supportdescribing your problem, I have found Andrew powell to be very helpful.
He suggested that I try the following, "The only sure fire way around this is to create a boot disk from a Windows 95 or 98 machine and then use it to boot your XP machine. If you have access to a Win 95/98 machine create the boot disk in the following way.
Insert a spare floppy into the drive.
Go to the DOS prompt and type 'FORMAT A: /S' (enter)
This will create a bootable floppy disk that you can then start up your Windows XP machine from. When it has booted you need to type the following:
'C:' (enter)
'CD CSM10' (enter)
Then either 'Heli10' or 'Aero10' or ' TxTest' (enter)"
Hope the above helps. |
i,ve been trying for week s to download unzip unzap etc for windows xp ,well i have installed and it will run at the xptest the singals are working for each channel on bar graphs and at start it does pick up interface and transmitter but when i start sim to fly the transmitter wont work and i have got a i think 209 runtime erroe code help me this is some crap and been going on for a solid month i,ve had to bum people from work just to load it up for me and i do start from the xp heli.bat files and porttalk is in sys32 area
